BLOGGER TEMPLATES - TWITTER BACKGROUNDS »

woensdag 28 april 2010

project session 26/04/2010

Today I only worked on the hardware and I was searching for the hex dump of the ELM327.
I found out that the signal was a 5V signal, although I could only get the rising edge of the signal on the oscilloscope. The search for the hex file was unsuccessful but since the device that we use is a cheap china clone we may be able to read out the pic that is used instead of the ELM327 in order to make a circuit board dedicated for our project.
Tom did the software this time, he made some major advance for the software.
So we are on a good way to getting the job done.

0 reacties: